Simulation experiments on the generation of organic sulfide in the Shengli crude oil     

C. T. Yue  S. Y. Li  H. Song 《Geochemistry International》2015,53(12):1052-1063

  相似文献   

Interplay between an axial channel belt,slope gullies and overbank deposition in the Puchkirchen Formation in the Molasse Basin,Austria          下载免费PDF全文

Larisa U. Masalimova  Donald R. Lowe  Timothy Mchargue  Richard Derksen 《Sedimentology》2015,62(6):1717-1748

Deep‐water sediments in the Molasse Basin, Austria, were deposited in a narrow foreland basin dominated by a large channel belt located between the steep Alpine fold and thrust belt to the south and the gentler northern slope off the Bohemian Massif. Several gas fields occur outside the channel belt, along the outer bend of a large meander. Accumulation of these overbank sediments reflects a complicated interplay between slope accommodation and debris‐flow and turbidity‐flow interaction within the channel. The tectonically oversteepened northern slope of the basin (ca 2 to 3°) developed a regionally important erosional surface, the Northern Slope Unconformity, which can be traced seismically for >100 km in an east–west direction and >20 km from the channel to the north. The slope preserves numerous gullies sourced from the north that eroded into the channel belt. These gullies were ca 20 km long, <1 km wide and ca 200 m deep. As the channel aggraded, largely inactive and empty gullies served as entry points into the overbank area for turbidity currents within the axial channel. Subsequently, debris‐flow mounds, 7 km wide and >15 km long, plugged and forced the main channel to step abruptly ca 7 km to the south. This resulted in development of an abrupt turn in the channel pathway that propagated to the east and probably played a role in forming a sinuous channel later. As debris‐flow topography was healed, flows spread out onto narrow area between the main channel and northern slope forming a broad fine‐grained apron that serves as the main gas reservoir in this area. This model of the overbank splay formation and the resulting stratigraphic architecture within the confined basin could be applied in modern and ancient systems or for subsurface hydrocarbon reservoirs where three‐dimensional seismic‐reflection data is limited. This study elucidates the geomorphology of the oversteepened slope of the under‐riding plate and its effects on the sedimentation.  相似文献   

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand          下载免费PDF全文

Tania Villaseñor  John M. Jaeger  Kathleen M. Marsaglia  Greg H. Browne 《Sedimentology》2015,62(4):1118-1148

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.  相似文献   

Nature,origin and evolution of a Late Pleistocene incised valley‐fill,Sunda Shelf,Southeast Asia          下载免费PDF全文

Faisal A. Alqahtani  Howard D. Johnson  Christopher A.‐L. Jackson  Mohd Rapi B. Som 《Sedimentology》2015,62(4):1198-1232

Understanding the stratigraphic fill and reconstructing the palaeo‐hydrology of incised valleys can help to constrain those factors that controlled their origin, evolution and regional significance. This condition is addressed through the analysis of a large (up to 18 km wide by 80 m deep) and exceptionally well‐imaged Late Pleistocene incised valley from the Sunda Shelf (South China Sea) based on shallow three‐dimensional seismic data from a large (11 500 km²), ‘merge’ survey, supplemented with site survey data (boreholes and seismic). This approach has enabled the characterization of the planform geometry, cross‐sectional area and internal stratigraphic architecture, which together allow reconstruction of the palaeo‐hydrology. The valley‐fill displays five notable stratigraphic features: (i) it is considerably larger than other seismically resolvable channel forms and can be traced for at least 180 km along its length; (ii) it is located in the axial part of the Malay Basin; (iii) the youngest part of the valley‐fill is dominated by a large (600 m wide and 23 m deep), high‐sinuosity channel, with well‐developed lateral accretion surfaces; (iv) the immediately adjacent interfluves contain much smaller, dendritic channel systems, which resemble tributaries that drained into the larger incised valley system; and (v) a ca 16 m thick, shell‐bearing, Holocene clay caps the valley‐fill. The dimension, basin location and palaeo‐hydrology of this incised valley leads to the conclusion that it represents the trunk river, which flowed along the length of the Malay Basin; it connected the Gulf of Thailand in the north with the South China Sea in the south‐east. The length of the river system (>1200 km long) enables examination of the upstream to downstream controls on the evolution of the incised valley, including sea‐level, climate and tectonics. The valley size, orientation and palaeo‐hydrology suggest close interaction between the regional tectonic framework, low‐angle shelf physiography and a humid‐tropical climatic setting.  相似文献   

Formation of the enigmatic Matoush uranium deposit in the Paleoprotozoic Otish Basin,Quebec, Canada     

Paul Alexandre  Kurt Kyser  Daniel Layton-Matthews  Steve R. Beyer  Eric E. Hiatt  Jonathan Lafontaine 《Mineralium Deposita》2015,50(7):825-845

  相似文献   

Characteristics of Cu isotopes from chalcopyrite-rich black smoker chimneys at Brothers volcano,Kermadec arc,and Niuatahi volcano,Lau basin   总被引：1，自引：0，他引：1  

H. A. Berkenbosch  C. E. J. de Ronde  B. T. Paul  J. B. Gemmell 《Mineralium Deposita》2015,50(7):811-824

  相似文献   

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed          下载免费PDF全文

Nick Eyles  Joe. I. Boyce  Niko Putkinen 《Sedimentology》2015,62(1):182-203

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).  相似文献   

Diagenetic evolution of Aptian evaporites in the Namibe Basin (south‐west Angola)          下载免费PDF全文

Laurent Gindre‐Chanu  John K. Warren  Cai Puigdefabregas  Ian R. Sharp  David C. P. Peacock  Roger Swart  Ragnar Poulsen  Hercinda Ferreira  Lourenco Henrique 《Sedimentology》2015,62(1):204-233

The widespread and dissected nature of the Angolan gypsiferous salt residuals offers a uniquely detailed view of the lateral and vertical relations inherent to secondary evaporite textures, which typify exhumed salt masses worldwide. Such secondary textures are sometimes misinterpreted as primary evaporite textures. Thin, metre‐scale and patchy, dome‐like gypsum accumulations are well‐exposed within strongly incised present‐day river valleys along the eastern margin of the Namibe and Benguela basins (south‐west Angola). These sections are time equivalent to the main basinward subsurface evaporites (Aptian Loeme Formation) which mostly consist of halite. The gypsum (here called the Bambata Formation) is interpreted to represent the final residual product of fractional dissolution and recrystallization of the halite mass that occurred during Late Cretaceous margin uplift and continues today. This halite underwent multiple episodes of diagenetic alteration between its deposition and its final exhumation, leading to the formation of various secondary gypsum fabrics and solution‐related karst and breccia textures that typify the current evaporite outcrop. Four different diagenetic gypsum fabrics are defined: thinly bedded alabastrine, nodular alabastrine, displacive selenite rosettes and fibrous satin‐spar gypsum. Current arid conditions are responsible for a thin weathered crust developed at the top of the outcropping gypsum, but the fabrics in the main core of the current at‐surface evaporite unit mostly formed during the telogenetic stage of uplift prior to complete subaerial exposure. Alteration occurred as various dissolving and rehydrating saline minerals encountered shallow aquifers in the active phreatic and vadose zones. Geomorphological and petrographic analyses, mostly based on the cross‐cutting relations and crystallographic patterns in the outcrop, are used to propose a sequence of formation of these different fabrics.  相似文献   

Clinoform geometry,geomorphology, facies character and stratigraphic architecture of a sand‐rich subaqueous delta: Jurassic Sognefjord Formation,offshore Norway          下载免费PDF全文

Stefano Patruno  Gary J. Hampson  Christopher A.‐L. Jackson  Tom Dreyer 《Sedimentology》2015,62(1):350-388

The integration of core sedimentology, seismic stratigraphy and seismic geomorphology has enabled interpretation of delta‐scale (i.e. tens of metres high) subaqueous clinoforms in the upper Jurassic Sognefjord Formation of the Troll Field. Mud‐prone subaqueous deltas characterized by a compound clinoform morphology and sandy delta‐scale subaqueous clinoforms are common in recent tide‐influenced, wave‐influenced and current‐influenced settings, but ancient examples are virtually unknown. The data presented help to fully comprehend the criteria for the recognition of other ancient delta‐scale subaqueous clinoforms, as well as refining the depositional model of the reservoir in the super‐giant Troll hydrocarbon field. Two 10 to 60 m thick, overall coarsening‐upward packages are distinguished in the lower Sognefjord Formation. Progressively higher energy, wave‐dominated or current‐dominated facies occur from the base to the top of each package. Each package corresponds to a set of seismically resolved, westerly dipping clinoforms, the bounding surfaces of which form the seismic ‘envelope’ of a clinoform set and the major marine flooding surfaces recognized in cores. The packages thicken westwards, until they reach a maximum where the clinoform ‘envelope’ rolls over to define a topset–foreset–toeset geometry. All clinoforms are consistently oriented sub‐parallel to the edge of the Horda Platform (N005–N030). In the eastern half of the field, individual foresets are relatively gently dipping (1° to 6°) and bound thin (10 to 30 m) clinothems. Core data indicate that these proximal clinothems are dominated by fine‐grained, hummocky cross‐stratified sandstones. Towards the west, clinoforms gradually become steeper (5° to 14°) and bound thicker (15 to 60 m) clinothems that comprise medium‐grained, cross‐bedded sandstones. Topsets are consistently well‐developed, except in the westernmost area. No seismic or sedimentological evidence of subaerial exposure is observed. Deposition created fully subaqueous, near‐linear clinoforms that prograded westwards across the Horda Platform. Subaqueous clinoforms were probably fed by a river outlet in the north‐east and sculpted by the action of currents sub‐parallel to the clinoform strike.  相似文献   

Cool water geyser travertine: Crystal Geyser,Utah, USA          下载免费PDF全文

Jennifer A. Barth  Henry S. Chafetz 《Sedimentology》2015,62(3):607-620

A sloping travertine mound, approximately 85 m across and a few metres thick is actively forming from cool temperature waters issuing out of Crystal Geyser, east‐central Utah, USA. Older travertine deposits exist at the site, the waters having used the Little Grand Wash Fault system as conduits. In contrast, the present Crystal Geyser travertine mound forms from 18°C waters which have been erupting for the last 80 years from an abandoned oil well. The present Crystal Geyser travertine accumulation forms from a ‘man‐made’ cool temperature geyser system; nevertheless, the constituents are an analogue for ancient geyser‐fed carbonate deposits. The travertine primary fabric is composed of couplets of highly porous, thin micritic laminae intercalated with thicker iron oxide rich laminae. Low Mg‐calcite is the dominant mineralogy; however, aragonite is a major constituent in deposits proximal to the vent and decreases in abundance distally. Cements exhibit a variety of fabrics, isopachous being common. Constituents include micro‐stromatolites, clasts, pisoids and the common occurrence of Frutexites‐like iron oxide precipitates. Leptothrix, a common iron‐oxidizing bacterium, is believed to be responsible for the production of the dense iron‐rich laminae. Pisoids litter the ground around the vent and rapidly decrease distally in abundance and size.  相似文献